Pure EV P Series Controller ID Guide

Below are the steps to determine which controller is in your PURE EV:

1. Locate the controller

To access the controller on the PURE EV, you need to locate the access hatch situated under the rear seat of the vehicle. The rear cover is held on with a couple of screws. If you have the rear cooler insert for your backseat, it will need to be removed first.

 

2. Access the controller

With the access hatch removed, you can see the controller box. It has a black plastic cover which will also need to be removed to see the controller.

 

3. Access & Identify The Controller

With the cover removed, you can easily see the controller. The controller in this model vehicle (2024) is the 450A ICON controller. Once you have verified the controller, you can close the cover back up.

 

 

4. Locate & Identify Programming Port

The programming port is located in the battery bay under the seat next to the Run/Tow switch. It may have a protective cap on it which will need to be removed for programming.

 

Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes. 

5. Programming Cable - ICON Controller

To establish a connection with the ICON controller in your PURE EV you will need to use CartCables part # CC-CBL-PURESE. It can be purchased HERE

  

7. Programming Software - ICON Controller

In addition to the programming cable you will need to have a copy of the "ICON Live" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.

  

Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.