EV Titan Spyder Controller ID Guide

1. Locate the controller

The controller on the Spyder model is located under the seat in the battery bay on the passenger side of the cart. It is mounted in a black protective box with the tow/run switch mounted on the side.

 

2. Access & Identify The Controller

To access the controller you will need to remove the cover from the controller box. With the cover removed, you can easily see & identify the controller. The Spyder uses a controller made by Enpower.

  

3. Locate & Identify Programming Port

x

The programming port on the Spyder is located close to the controller.

 

Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes.

4. Programming Cable

To establish a connection with the Enpower controller in your EV Titan golf cart you will need to use CartCables part # CC-CBL-ENPWCB. It can be purchased HERE

 

5. Programming Software

In addition to the programming cable you will need to have a copy of the "Parameter Calibrator" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.

 

Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.