Dart Xtreme Controller ID Guide
1. Locate the controller
![]() |
The controller on the Xtreme cart is accessed from passenger side of the vehicle and is mounted in the battery bay. There is a plastic cover that needs to be removed the gain access to the controller. |
2. Access the controller
![]() |
To access the controller the cover will need to be removed. |
3. Observe & Identify The Controller
![]() |
When the cover is removed, the controller in the Dart which is an Enpower MC3336 controller with the "Umbilical" configuration is easy to see. |
4. Locate & Identify Programming Port
x
|
Programing port location |
5. Programming Cable
![]() |
To establish a connection with the controller in your Dart EV you will need to use CartCables part number CC-CBL-ENPWSE. It can be purchased HERE. |
6. Programming Software
![]() |
In addition to the programming cable you will need to have a copy of the "Parameter Calibrator" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE. |
Please note: We do not sell the software, just the cables.
If you have any further questions, please do not hesitate to contact us HERE.