Bintelli A Model With NEOS Controller

Now that we have identified which controller is in your vehicle we can take a look at what is required to connect to the vehicle and make your desired changes.

1. Observe & Identify The Controller

NEOS Controller

 

2. Locate & Identify Programming Port

The programming port on the A Model cart is located on the lower portion of the passenger side dash, just to the left of the glove box and under the dash-mounted accessory switches.

 

 

3. Programming Cable - NEOS Controller

To establish a connection with the NEOS controller in your cart you will need to use CartCables part # CC-CBL-NEOSCB. It can be purchased HERE

 

4. Programming Cable - NEOS Controller

In addition to our programming cable you will also need to have this specific CANUSB adapter which is NOT included with our cable- It must be purchased separately, directly from the manufacturer. Visit their site: www.canusbshop.com

 
5. Programming Software - NEOS Controller

In addition to both cables you will also need to have a copy of the "NEOS Tune" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.

 

Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.